Building another hen house

As the population of chicken grows more hen houses are needed.

We have made a simple frame for the floor from pallet wood.

We found some laminate flooring in the outhouse, cut it to size and taped the underneath to prevent moisture from entering. (We later get told off by Ann, as she had the flooring earmarked for another job.)

The laminate flooring gets screwed onto the base. (Note: Chris is working ;-))

Rather than taking pallets apart we then cut out the boards with a circular saw (thanks to the invention of petrol generators and the founder of "Praktiker" in Germany).

We end up with a nice pile of boards which are free from nail holes and cracks.

Using a tabel saw at a 45° angle the boards are cut either side.

These "rain screen" boards can now be screwed onto the house. Which reminds me: we need a frame first.

First post, cut at a 45° angle at the top.

 The bottom frame is done.

The roof is taking shape and the first boards are up. Due to rain we are working inside the van.

The front boards are going on. There isn't much room in the van so it's difficult to take pictures.

More boards on the front and the roof frame is finished.

The front is all filled in, now to the back.

Day 3 and the sides are now being done. Both will be hinged to allow easy access.

Sides are done and the roof has been covered with odd bits of board to support the roofing felt.

Time for finishing touches. Ann is painting whilst I am working on egg laying boxes and Chris, who lost interest and motivation on day 2, is sleeping.

Branches from our garden make some excellent perches.

Egg laying boxes are in. Ann finishes the felt before the house is moved into the field.

After fitting the automatic door the chickens move in.